24+ Years Building in Southern California
Tad's Construction Inc. is a licensed, bonded and insured California contractor. Three CSLB classifications under one roof means your framing, concrete, landscape and aquatic scopes are delivered by one accountable team — not four subcontractors.
Most outdoor and site projects touch structure, ground and water. Tad's Construction holds the California classification for all three — so scopes do not fall between trades, and no one is waiting on someone else's crew.
Framing, room additions, structural repairs, tenant improvements and finish carpentry built to current California building and seismic code.
Grading, drainage correction, concrete flatwork, retaining walls, masonry, pavers, irrigation and grounds improvements.
New pool and spa construction, structural rehabilitation, hydraulics, equipment replacement, automation and finishes.
For more than 24 years we have built, repaired and remediated structures, grounds and aquatic facilities across Southern California — for homeowners, property managers, public agencies and prime contractors.
Because we hold B-1, C-27 and C-53 classifications, a project that involves a slab, a wall, a roof structure and a pool does not need four separate contracts. One superintendent owns the schedule, the inspections and the punch list.
Our remediation work covers deteriorated exterior structures, grading and drainage failures, water intrusion, and the modernization of aging pools and site elements.
Every job runs through the same four phases. These are our own crews and our own job sites — shown in the order the work happens.
We start by removing what has failed. Deteriorated slabs, cracked hardscape and unsound walls come out first so the new work is built on sound ground.
Skid-steer demolition of a failing masonry wall and pilaster, with debris controlled and hauled the same day to keep the sidewalk open.
Selective demolition of a delaminated tile patio down to sound substrate — the step most often skipped, and the reason resurfacing jobs fail twice.
Grade, drainage and reinforcement go in before anything vertical. Slabs are formed and tied to spec, and retaining structures are laid to carry real load.
Full rebar mat tied on chairs, plumbing stub-ups set and protected, then a continuous placement and screed. Pouring in one operation is what prevents the cold joints that crack a slab in its first season.
CMU laid to a footing on a hillside cut, cells reinforced and grouted, with drainage behind the wall so hydrostatic pressure never builds.
Rough carpentry, shear walls and roof structure go up to engineered plans, then get dried in and inspected before any finish material arrives.
Full structural frame with shear sheathing and weather-resistive barrier applied, windows set and openings flashed — the building closed to weather before interior trades are scheduled.
New gable-framed addition structurally tied into an existing roof and wall line, with the subfloor set and the opening squared for the new envelope.
Ledger-attached rafters and solid decking over a poured patio, with posts set on footings rather than surface-mounted to slab edge.
Stain, stucco, tile, cabinetry and lighting go in last. Then inspections are cleared, the site is returned clean, and the warranty is documented.
Heavy-timber pavilion stained and trimmed while the masonry cook station is finished beneath it — structure and hardscape by the same crew.
Block-cored fireplace and raised hearth taken to finish coat on site, sized to the wall it sits against instead of dropped in as a kit.
The same job at handover: cabinetry set and levelled, counters templated, backsplash tiled and flooring run through — ready for final walk.
Over 24 years of field work across framing, site construction, masonry and aquatic trades — not a sales office subcontracting it out.
Licensed operators, experienced craftsmen and a project manager who is on the job, holding the schedule and the inspection sequence.
Precision concrete, true lines in masonry and carpentry, and hydraulic systems installed properly the first time. Details are the job.
Straight communication, written scope, full bonding and insurance, and a documented warranty at closeout.
Tad's Construction Inc. is registered for federal contracting and supports agencies, districts, municipalities and prime contractors as either a prime or a subcontractor. Procurement identifiers and our downloadable capability statement are one click away.
Send us the scope, the address and a few photos. You will get a straight answer on whether it is a fit, what it involves, and roughly what it costs.